Quick Contact

+92 333 5888277

Quick Contact

+92 333 5888277

Woven Flexible Tarpaulin

Woven Flexible Tarpaulin

  • Fire retardant, waterproof, rotproof and UV-resistant

  • Band reinforced tarpaulin in sheet of 4×6 m developed by international research project and designed for long outdoor use in all climates

  • Woven high density polyethylene (HDPE) black fibres fabric coated on both sides with low density polyethylene (LDPE) coating

  • Highly recommended for family shelter protection

  •  
Size / sheet4 x 6 m ±1%
Size / roll4 x 60 m ±1%
Specific sheet without bands weigh190 ±20 g under ISO 3801 (equivalent to min 170 to 210 gsm max)
Complete sheet with bands weightPlain sheet specific weight plus 10% additional weight for reinforcement bands under ISO 3801
Total weightFrom min 187 to 231 gsm. Specific weight of bands from min 150 to 200 gsm max
Sheet / rollWoven HDPE black fibers fabric, double-side LDPE coating, reinforced with 6 bands of 75 ±3% mm width woven black HDPE fibers fabric and coated outside. Pre-punched 8 mm holes on the 2 side bands at 0.1 ±10% m intervals, positioned in the centre of the bands (only the reinforcement bands are pre-punched, not the tarpaulin itself). Flame retardant EN13823+A1
Tensile strength
 
Min 500N, 15-35% elongation in warp and weft in plain sheet under ISO 1421-1
UV resistanceAfter 1500 hours UV under ASTM G53/94 (UVB 313 nm peak) minimum 80% of original value of the actual product and not less than 475N
Reinforcement bandsMin 700N as per ISO 1421-1, pulling length wise in a pre-punched 8 mm hole with a hook of 8 mm wire diameter, at 200 mm from the end of the band. UV resistance 80% of original value and not less than 665N
WeldingOnly one is allowed, lengthwise. The tarpaulin tensile strength crossways at the place of welding under ISO 1421-1 minimum 50% of original value and not less than 400N

Images